ანტიფრიზი პარამეტრები

[kaspera]

სად ვიყიდი რასაც ქვია ანტიფრიზს, (წყალი ანტიფრიზის ნაცვლად როარიყოს) ან რაიმე ინდექსები ხოარააქვს ხარისხიანს, თეგეტაში ექნებათ კარგი?

[kaspera]

დადე

[Dzia]

დადე

სამწუხაროდ, ნახატი არ დაიდო... და სამწუხაროდ ინგლისურადაა:


Changing the coolant

1. Remove the under cover.
2. Place a proper container under the drain plug and loosen the drain
plug.

3. Loosen the radiator cap to drain the coolant from the radiator. Then
drain the coolant from the reserve tank. Tighten the drain plug securely.
4. Install the under cover.
5. Slowly pour the coolant and fill to the radiator filler neck and to the
reserve tank’s “FULL” level mark. Do not pour the coolant too quickly,
as this may lead to insufficient air bleeding and trapped air in the system.

Coolant capacity
6.6 US qt (6.2 liters, 5.5 Imp qt)

6. Put the radiator cap back on and tighten firmly. At this time, make
sure that the rubber gaskets in the radiator cap are correctly in place.
7. Start and run the engine for more than five minutes at 2,000 to
3,000 rpm.
8. Stop the engine and wait until the coolant cools down (122 to
140°F [50 to 60 °C]). If there is any loss of coolant, add coolant to the
11-18
radiator’s filler neck and to the reserve tank’s “Full” level.
9. Put the radiator cap and reservoir cap back on and tighten firmly.